We accept:
Focus on BÜRKERT Pressure Measurement
Valves Online are one of the largest online companies offering entire solutions to all your valve application needs. As an official distributor of the German manufacturer ‘Bürkert’ we can offer their enormous range of flow, level, pressure and temperature controllers/transmitters.
Following our last blog on Level measurement devices, we would now like to talk about BÜRKERT pressure measurement.
Pressure measuring device / Switch
|
|
|
This intelligent mini transmitter/switch with an extra-large display is specially designed to switch alarms and to establish a monitoring system or an On/Off control loop. The switching points can be programmed with the three-key keypad under the display. In addition, the process value can be transmitted to the PLC (4-20 mA). The connection to the process in the piping is made using standard fittings (G1/2, NPT1/2,Rc1/2).
View the Burkert Type 8311 Pressure Switch / Transmitter below:
Pressure Switch
Pressure measuring device
- Ceramic/Thick film measuring cell
- 2-wire version for 4...20 mA output
- Compact, stable construction for the highest operational reliability
The compact Type 8316 pressure measuring device meets the highest requirements with regard to mechanical loading, EMC characteristics and operational reliability. It is particularly suitable for demanding industrial applications. For aggressive media where stainless steel is not resistant, process connections in PVDF are available.
Pressure transmitter for general applications,
0...25 bar
- Piezoresistive or thin film sensor element
- Available with hygienic flush diaphragm
- Housing and wetted parts in corrosion-resistant stainless steel
- Standard signal 4...20 mA for connection to automation systems
- Plug for fast installation and service
This pressure transmitter is designed to cover the majority of industrial applications in the field of pressure measurement technology. High accuracy, compact design, robust construction and flexibility make the transmitter suitable for different measurement functions. For technical reasons, the piezoresistive sensor element is used for measuring ranges up to 16 bar and thin film sensor element for the measuring range of 25 bar. All wetted parts are made of stainless steel and completely welded. Internal seal elements, which could restrict the choice of measuring media, are excluded.
Pressure transmitter for general applications,
0…25 bar
- Available with hygienic flush-mounted diaphragm
- Housing and wetted parts in corrosion-resistant stainless steel
- Standard signal 4…20 mA for connection to automation systems
- Plug for quick installation and service
- Many pressure ranges available
This pressure transmitter is designed to cover the majority of industrial applications in the field of pressure measurement technology. High accuracy, compact design, robust construction and flexibility make the transmitter suitable for various measurement tasks. All wetted parts are made of stainless steel and completely welded. Internal seal elements, which restrict the choice of measuring materials, are excluded. Many other pressure ranges available, 0.125 % accuracy, other output signals, other electrical connections, other process connections, on request.
Bourdon tube pressure gauge, back or lower
mount connection
- For gases and not crystallizing liquids
- Back or radial mount lower connection
- Different sizes and measurement ranges
Manometer for the pressure measurement of neutral and aggressive gases and not crystallizing liquids with small viscosity, that will not attack copper alloy manometer interior parts. A circular bourdon tube in alloyed copper is used as sensor.
Pressure Switch for neutral gases and liquids
- For neutral gases and liquids
- Models normally open contact, normally closed contact or changeover contact
- Switching point can be adjusted with grub screw
The pressure switch is used to convert adjustable pneumatic signals into electrical signals.
Pressure transmitter
- Ceramic measurement cell
- 2-wire version
- Wetted part material 1.4305, ceramics, FKM
The pressure transmitter consists of a ceramic sensor, an amplifier and a transmitter. The sensor signal will be amplified and the transmitter converts it into an analog signal. The transmitter is designed for static and dynamic measurements in neutral or aggressive fluid or gas and is characterized by a low temperature sensitivity and good mechanical properties (e.g. no aging, no creep). Furthermore, the modular transmitter commands high measurement accuracy, robustness, low required space and flexibility upon the adaptation to different measurement tasks. With these properties, many pressure control applications are possible (e.g. in water and gas distribution networks), through monitoring pumps or filters.
To see the full Bürkert range click the link below:
Please contact our technical sales team with your level measurement requirements and projects for quality and competitive solutions.
Email: sales@valvesonline.co.uk
Phone: 01822 855600