An economical digital timer unit that fits onto a selection of solenoid valves to give fully programmed On / Off cycling over a range of timed periods. Typical applications include condensate blow off on small compressed lines and compressors, remote watering and flush downs.
Time sequence: Any time sequence from 1 second up to 99 hours 59 min 59 seconds.
Can be set to repeat cycle Power ON/OFF OR Power OFF/ON OR single shot ON/stay OFF with Mode Button.
Key Features:
Fits ISO DIN43650A between solenoid coil and connector
Switch capacity: 1.5 Amps Maximum
Power consumption: 10mAmp Max
Temperature range: -10°C to +70°C
Protection: IP65 EN60529 with connector
Approvals: CE
Flame retardant plastic
highly durable microcomputer
high precision
Green LED display (ON) RED LED display (OFF) time display
Switch between ON then OFF or OFF then ON - Press Mode button. (from new is ON then OFF)
Time adjustment: (GREEN display shows Power ON Time / RED display show Power OFF Time
How to program digital timer
Press Mode - Choose ON/OFF or OFF/ON or Single Shot (can change later)
GREEN Screen ON Time Press ADD to increase 10 hour ON, press Enter to move to next digit Press ADD to increase 1 hour ON time, press Enter to move to next digit Press ADD to increase 10 minute ON Time, press enter to move to next digit Press ADD to increase 1 minute ON Time, press enter to move to next digit Press ADD to increase 10 second ON Time, press enter to move to next digit Press ADD to increase 1 second ON Time, press enter to move to RED OFF time selection.
Repeat the selection for off time (RED screen)
Finally, you will have option to change ON/OFF or OFF/ON or single shot and stay off, and it's all set up ready to use.