This ATEX Approved Brass Solenoid Valve is a 2 way, normally closed, servo-assisted solenoid valve with a choise of NBR, FKM, EPDM or HNBR seals and suitable for use in ATEX environments.
Available in sizes from 3/8” to 2” with screwed BSP end connections, this solenoid valve requires a minimum differential pressure of 0.5 bar to operate fully.
The valve has a working pressure range of 0.5 to 15 bar, a pressure rating, ∆P (differential pressure) of 0.5 to 10 bar and an ambient temperature range of -20°C to +60°C.
Media temperature ranges are dependant on seal materials as follows: -15°C to +80°C (NBR), -10°C to +180°C (FKM), -5°C to +130°C (EPDM) and -40°C to +150°C (HNBR).
Key Features:
Servo-Assisted
Normally Closed
2 Way
Brass Body
Seals: NBR, FKM, EPDM or HNBR
Screwed BSP
Sizes: 3/8" to 2"
12VDC, 24VDC, 24VAC, 110VAC, 230VAC
Pressure range: 0.5 to 15 Bar max
Media temperature:
-15°C to +80°C (NBR)
-10°C to +180°C (FKM)
-5°C to +130°C (EPDM)
-40°C to +150°C (HNBR)
Ambient temperature: -20°C to +60°C
ATEX Certified with ATEX 22003EX Coil: ATEX EExmIIT4 II 2G & 2D IP65 T130°C